Filter
Top Products
Top-up rinse for Cottons
When this is activated, additional
water flows into the drum at the end
of the main wash to cool the suds
down. Hot suds can damage plastic
drainage pipes.
Top-up rinse takes place when
temperatures of 95°C and 75°C are
selected.
Top-up rinse should be activated:
–
to prevent the danger of scalding if
the drain hose is hooked over the
edge of a sink or basin.
– where the drainage pipes do not
comply with DIN 1986.
The washing machine is delivered with
the Top-up rinse for
Cottons
deactivated.
Follow steps A to G to programme
and store in memory.
Before you begin, first ensure that:
–
The washing machine is switched off.
–
The machine is properly closed.
–
The programme selector is at
Finish
.
APress the
Start
button and keep it
pressed in whilst carrying out steps
B to C.
BSwitch the machine on with the
I-On/0-Off
button.
CWait until the
Start
indicator light
comes on . . .
D. . . and then release the
Start
button.
ETurn the programme selector to the
Cottons 40°C
position:
If the
Soak/Pre-wash
sequence
indicator light:
does not flash = the Top-up rinse for
Cottons has not
been activated.
flashes = the Top-up rinse for
Cottons has been
activated.
FPress the
Start
button to activate or
deactivate the Top-up rinse for
Cottons
option.
GSwitch the machine off with the
I-On/0-Off
button.
The setting you have selected is now
stored in memory and will remain so
until you alter it.
Programmable functions
63