Filter
Top Products
With the help of the following notes minor faults in the performance of the
appliance, some of which may result from incorrect operation, can be put right
without contacting the Service Department.
,
Repair work to electrical appliances should only be carried out by a
suitably qualified person in accordance with local and national safety
regulations. Repairs and other work by unqualified persons could be
dangerous. The manufacturer cannot be held liable for unauthorised work.
The chart is divided into the following sections to help you:
–
The programme does not start.
–
The wash programme stops and a fault indicator light comes on.
–
A fault indicator light comes on but the wash programme continues as normal.
– General problems or an unsatisfactory wash result.
– The drum door does not open when you press the Door button.
The programme does not start.
Fault indicator Possible cause Remedy
The Anti-crease/Finish
indicator light is not on,
or the Start indicator
light is not flashing.
There is no power.
Check that
–
the mains plug is
plugged in and switched
on.
–
the fuse or circuit
breaker has not tripped.
The Locked check light
is flashing.
The system lock has
been activated.
Deactivate the system lock.
The programme does
not start when
Drain/Spin has been
selected.
The washing machine
has not been prepared
for using for the first
time.
Prepare the machine as
described in "Before using
for the first time".
Problem solving guide
36