Filter
Top Products
Pull the condenser unit out.
Clean the condenser unit at both
ends (front and back).
Wipe the rubber seals at both ends
gently but thoroughly.
Clean the two long sides of the unit.
Stand the condenser unit lengthwise
on a towel until it is quite dry.
Replace the condenser unit correctly
(see illustration above left).
Return both levers on the condenser
unit to the horizontal position.
Pull forwards on the unit to check
that it is firmly in place.
Replace the inner cover and check
that it is also firmly in place, other-
wise water may leak from the ma-
chine.
Reposition the outer cover and push
back into place.
Cleaning and care
23