Filter
Top Products
Description:
1) Spray button
2) Steam blast button
3) Steam regulator controls
4) Self-clean button
5) Spray nozzle
6) Filling hole
7) Base
8) Temperature gauge
9) Pilot light
Important Safety Instructions
When using electrical appliances, basic safety
precautions should always be followed, including the
following:
1. Read these instructions carefully before putting
the appliance into operation and keep them for
future consultation.
2. This appliance is only for domestic use, not
industrial use.
3. Do not leave the appliance within the reach of
children or disabled individuals.
4. Before connecting the appliance to the
mains, check that the voltage indicated on the
nameplate coincides with the mains voltage.
5. No liability is accepted for damage caused
through inappropriate handling or use other
than that stipulated in this manual.
6. Do not use this appliance if it is damaged in any
way.
7. Unravel the power cable fully.
8. Always unplug the iron when out of use, even for
a short period.
9. Unplug the iron before filling or emptying the
water deposit.
10. Never submerge the iron in water or put it under
running water. This appliance is not intended for
use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been
given supervision or instruction concerning use
of the appliance by a person responsible for their
safety. Children should be supervised to ensure
that they do not play with the appliance.
11. The iron must not be left unattended while it is
connected to the supply mains.
12. The plug must be removed from the socket-outlet
before the water reservoir is filled with water.
13. The iron must be used and rested on a stable
surface.
14. When placing the iron on its stand, ensure that the
surface on which the stand is placed is stable.
15. The iron is not to be used if it has been dropped, if
there are visible signs of damage or if it is leaking.
16. If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
Before first use
• Some parts of the iron have been lightly greased
and thus the iron may produce a little smoke when
plugged in for the first time. This will stop after a
short period of time.
1. Before putting into use for the first time, remove
the plastic cover from the base and clean the base
with a soft cloth.
2. Keep the base smooth: do not touch metal objects
(buttons, zips, etc.)
Pure wool fabrics (100%) can be ironed with the iron
set to steam. Preferably choose a high steam position
and use a dry ironing cloth.
Instructions for Use
Temperature setting
1. Always check each garment’s ironing instructions.
2. If a garment does not have any ironing instructions,
see the fabric classification below.
3. If the garment has several different types of fibre,
select the lowest temperature setting.
4. Classify the number of garments by ironing
temperature. The iron heats up faster than it cools
down so we recommend you start your ironing with
those garments that require lower temperatures
and then gradually increase the setting.
5. Connect the appliance to the mains. The pilot light
will come on. Turn the temperature gauge to the
desired temperature.
* Setting for nylon and acetate
** Setting for wool or silk
*** Setting for cotton or linen
The pilot turns off when the desired temperature is
reached.
How to fill the water deposit
1. Unplug the appliance.
2. Fill the water deposit through the filling hole.
3. If your tap water is hard, use distilled water only.
4. Do not use chemically decalcified water.
5. The harder the water the more frequently the iron
should be cleaned.
2
1
8
4
7
9
5
6
3
_IM.indd 2 2013/08/13 11:51:13 AM