Maytag W10420491A Washer User Manual


 
19
Error Code Appears in Display (cont.)
dU (Lid cannot unlock)
appears in display
Objects on washer lid prevent it from
unlocking.
Remove objects, such as a basket of laundry, from the top of
the washer.
F## code (F-type
error code) appears
in display
System error code.
Press START/PAUSE once to clear the code. Then press
START/PAUSE again to restart washer. If code appears again,
call for service.
Fd (Factory Default)
Washer sets back to factory default.
To return all options and modiers to Factory Default, press
POWER/CANCEL, select Drain & Spin cycle, and then press
Extra Rinse, Fabric Softener, Extra Rinse, Fabric Softener within
5 seconds. When done correctly, the 7-segment displays show
“Fd” for 3 seconds and then unit returns to Standby Mode.
If you experience
Possible Causes
Solution
TROUBLESHOOTING
First try the solutions suggested here or visit our website to possibly avoid the cost of a service call ...
In USA, www.maytag.com/help - In Canada, www.maytag.ca.