Filter
Top Products
11
7. Select cycle
Wash Temp
Hot
Some cold water is added to save
energy. This will be cooler than
your hot water heater setting.
Warm
Some cold water will be added, so
this may be cooler than what your
previous washer provided.
Cold
Warm water may be added to
assist in soil removal and to help
dissolve detergents.
Suggested Fabrics
Whites and pastels
Durable garments
Heavy soils
8. Select cycle modiers
Once you select a cycle, the default settings for that cycle will
be lit. Press the Modier buttons to change the Soil Level, Spin
Speed, and Wash/Rinse Temperature, if desired. Not all settings
are available with all cycles.
NOTE: Always read and follow fabric care labels instructions
to avoid damage to your garments.
Dark colors that
bleed or fade
Light soils
Bright colors
Moderate to light soils
Turn cycle knob to choose your wash
cycle. The indicator for Estimated
Time Remaining will light up with a
cycle time. For more information, see
“Control Panel”.
10. Press START/PAUSE to begin
wash cycle
9. Select cycle options
Select any other cycle options you may wish to add, if not
previously set. Some cycles will automatically add certain
options such as Extra Rinse. These may be turned off, if
desired.
NOTE: Not all options are available with all cycles.
Press the START/PAUSE button to start the wash cycle. When
the cycle has nished, the DONE indicator will light and the end
of cycle signal will sound (if set). Promptly remove garments
when cycle is done to prevent odor, reduce wrinkling, and rusting
of metal hooks, zippers, and snaps.
If lid is left open for more than 10 minutes the water will
pump out.