Filter
Top Products
19
Error Code Appears in Display (cont.)
dU (Lid cannot unlock)
appears in display
Objects on washer lid prevent it from
unlocking.
Remove objects, such as a basket of laundry, from the top of
the washer.
F## code (F-type
error code) appears
in display
System error code.
Press START/PAUSE once to clear the code. Then press
START/PAUSE again to restart washer. If code appears again,
call for service.
Fd (Factory Default)
Washer sets back to factory default.
To return all options and modiers to Factory Default, press
POWER/CANCEL, select Drain & Spin cycle, and then press
Extra Rinse, Fabric Softener, Extra Rinse, Fabric Softener within
5 seconds. When done correctly, the 7-segment displays show
“Fd” for 3 seconds and then unit returns to Standby Mode.
If you experience
Possible Causes
Solution
TROUBLESHOOTING
ACCESSORIES
Accessory
Part Number:
8212526
31682
1903WH
Washer drip tray, ts under all
All-purpose appliance cleaner
Laundry supply storage cart
See “Installation Instructions” for installation accessories
First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions) to possibly avoid the
cost of a service call ... In USA www.maytag.com/help - In Canada www.maytag.ca.