Filter
Top Products
4
power
cancel
start
pause
press and
hold to start
press and hold
for 3 seconds
steam for stains
fresh hold
whites
heavy duty
delicate
rinse/drain
& spin
small
load
with
clean
washer
bedding
wrinkle control
allergen
normal
+
-
temp levelsoil level spin speed
optimal
dispense
learn
more
drum
light
sound &
display
control
lock
handwash
specialty
cycles
CONTROL PANEL AND FEATURES
POWER/CANCEL
Press to turn the washer on and off.
Press to stop/cancel a cycle at any time.
NOTE: When the washer is turned on for the rst time after
being plugged in or after a power outage, please allow
approximately one minute for the washer display to start up.
WASH CYCLE KNOB
Use your Wash Cycle knob to select available cycles on your
washer. Turn the knob to select a cycle for your laundry load.
See “Cycle Guide” for detailed descriptions of cycles.
START/PAUSE
Press and hold to start a cycle, or press once while a cycle
is in process to pause it.
COLOR LCD DISPLAY SCREEN
This screen will display current options and settings, cycle
information, and estimated time remaining. You can also
use the navigation buttons below and on either side of the
screen to access helpful laundry and troubleshooting tips.
OPTIONS AND FEATURES
Optimal Dispense
This button is used to adjust the dispenser settings,
including adjustments for detergent concentration and
water hardness level.
IMPORTANT: When using the dispenser cartridge with
concentrated liquid detergent, be sure to change the
detergent concentration settings in the control if the
detergent used is different than factory preset of 2x
concentration.
6
8
1
2
3
5
7
4
1
4
C
B
A Optimal Dispense liquid
HE detergent cartridge
B Powdered HE detergent compartment
C Liquid fabric softener
D Chlorine bleach
9
D
A
Learn More
Press to get more information on a setting or option, or to
access the built-in troubleshooting feature. Press LEARN
MORE again to return to the previous screen.
Drum Light
Press to turn the Drum Light on or off. The drum light
will also turn on when the door is opened, and turn off
automatically after 5 minutes.
Sound & Display
The SOUND & DISPLAY button allows you to adjust the
LCD display settings, including brightness and other
preferences. Under SOUND & DISPLAY, you can access
the following functions:
Cycle Signal
Adjusts the volume of the End of Cycle signal, or turns
it off.
Button Sound
Adjusts the volume of the button sounds, or turns
them off.
Brightness
Adjusts the brightness of the LCD screen.
Language
Displays information in English, French, or Spanish.
Control Lock
Allows you to disable all controls except the power button
to avoid unauthorized use or changes to running cycles.
3
2
5