Filter
Top Products
15
A.00 A. VAULT VIEWING OPTION
00
SC
This option is either SELECTED “ON” or NOT SELECTED “OFF.”
Not Selected “OFF.”
SC Selected “ON.”
Press DELICATES & KNITS keypad once for this selection. When selected, the
money and/or cycle counts will be viewable (if counting is selected), when the
coin box is removed.
Press WOOLENS keypad once to advance to next code.
b.05 b. VALUE OF COIN 1
05 This represents the value of coin 1 in number of nickels. 05 = $0.25.
By pressing PERMANENT PRESS keypad you have the option of 1-199 nickels.
PS MODE ONLY: Represents the total vend price in nickels.
Example: b.30 is equal to $1.50.
Press WOOLENS keypad once to advance to next code.
C.20 C. VALUE OF COIN 2
20 This represents the value of coin 2 in number of nickels; 20 = $1.00.
PR MODEL ONLY: Currently set for $0.25
By pressing PERMANENT PRESS keypad you have the option of 1-199 nickels.
Press WOOLENS keypad once to advance to next code.
d.00 d. COIN SLIDE OPTION
00
CS
This option is either SELECTED “ON” or NOT SELECTED “OFF.”
Not Selected “OFF.”
CS Selected “ON.”
Press DELICATES & KNITS keypad 3 consecutive times for this selection. When
coin slide mode is selected, set b. equal to value of slide in nickels. Set Step 6
(regular cycle price) and Step 3 (special cycle price) to number of slide
operations. If the installer sets up “CS” on a coin drop model, it will not register
coins.
Press WOOLENS keypad once to advance to next code.
E.00 E. ADD COINS OPTION
00
AC
This option is either SELECTED “ON” or NOT SELECTED “OFF.”
This option causes the customer display to show the number of coins (coin 1)
to enter, rather than the dollars-and-cents amount.
Not Selected “OFF.”
Selected “ON.”
Press DELICATES & KNITS keypad 3 consecutive times for this selection.
Press WOOLENS keypad once to advance to next code.
F.00 F. ENHANCED PRICING OPTION
00
CP
Su
Not Selected “OFF.”
Cycle-Based pricing enabled. This option allows configuration of different
prices for cold, warm, and hot water cycles.
Super Cycle pricing enabled. This option allows customers to upgrade cycles
by depositing extra money. Setup codes “H.” and “h.” will be displayed only
when this option is enabled.
Press DELICATES & KNITS keypad once for this selection.
Press WOOLENS keypad once to advance to next code.
H.01 H. SUPER CYCLE UPGRADE PRICE
(Skipped unless super cycle pricing is enabled.)
01 This represents the number of coin 1 required to upgrade a base cycle to a
super cycle.
Advance from 0-39 by pressing PERMANENT PRESS keypad.
Press WOOLENS keypad once to advance to next code.
h.01 h. SUPER CYCLE TYPE (Skipped unless Super Cycle pricing is enabled.)
01 This represents the super cycle upgrade option.
Press PERMANENT PRESS keypad to step through upgrade options 1-3 as
follows:
01 - enhanced wash, extra 3 minutes of wash tumble in addition to the
programmed wash time.
02 - extra rinse for all cycles.
03 - both 01 and 02.
Press WOOLENS keypad once to advance to next code.
J.Cd J. COIN/DEBIT OPTION
Cd
C_
_d
Ed
Both coin and debit selected.
Coins selected, debit disabled.
Debit Card selected, coins disabled.
Press DELICATES & KNITS keypad 3 consecutive times for this selection.
Enhanced debit is self-selected when a Generation 2 card reader is installed in
the washer. The Ed option cannot be manually selected or deselected.
Press WOOLENS keypad once to advance to next code.
L.00 L. PRICE SUPPRESSION OPTION
00
PS
This option causes the customer display to show “ADD” or “AVAILABLE” rather
than the amount of money to add. (Used mainly in debit installations.)
Not Selected “OFF.”
PS Selected “ON.”
Press DELICATES & KNITS keypad once for this selection.
Press WOOLENS keypad once to advance to next code.