29
J. PREOPERATIONAL INSTRUCTIONS
1. To start the dryer:
Microprocessor Controller (Computer) Dryers
a. Light emitting diode (L.E.D.) display will read READY (meaning no cycle in progress).
b. Press the letter on the keyboard (touch pad) corresponding to the cycle desired (i.e., key E) and the
dryer will then start.
c. L.E.D. display will now show Cycle In Progress and Cycle Status meaning that the dryer is in the
drying cycle (dry mode for 30 minutes) and count downwards in minutes.
NOTE: Pressing keyboard (touch pad) key A, B, C, D, or F will also start the dryer. The
six (6) preprogrammed drying cycles A through F have been stored in the microprocessor
controller (computer) memory. Refer to the Programming Manual supplied with the dryer for
more specific operating instructions.
NOTE: The dryer can be stopped at any time by opening the main door or by pressing the STOP
red key. To restart the dryer, press the START green key or a preprogrammed cycle
key (i.e., E).
NOTE: Selection (settings) changes can be made at any time during the drying cycle by pressing the
STOP red key twice. The L.E.D. display will return to REAdY at which time a
new cycle selection can be made.
DUAL TIMER DRYERS
1. Turn drying timer knob for a time of 20 minutes.
2. Select High Temp.
3. Push Push to Start switch.
4. To stop dryer, open the main door.
Spin and dwell (stop) times are adjustable at the reversing timer.