Filter
Top Products
7
Select “Sensor Dry”. The next screen
will be the Review Screen. If the
selections are correct, press
Start/Pause. If changes need to be
made, follow the next steps.
Dryness Level – Select “Dryness
Level” to change from the default setting
(“Normal Dry”). The dryness level ranges
from least dry to driest. Select the level
appropriate for the load. The “Normal
Dry” level will be used for most loads.
Temperature – Select “Tempe-
rature” to change from the default
setting (“Medium”). The temperature
settings range from extra low to high.
Select the temperature that is
appropriate for the load.
SETTING A SENSOR DRY PROGRAMME
If there are no words on the touchscreen, open the door, touch any key (except OFF), or touch the screen to “wake” the
controls.
Step 1
Step 2
Step 3
sensor dry
Home
timed dry
freshen up
air fluff
(no heat)
favourites
crease removal
dryness level
normaldry
Press "Start/Pause" or
change your selections below.
temperature
medium
options
programme chime medium
Dryness
driest drier
normal dry
less dry
least dry
dryness level
normal dry
Press "Start/Pause" or
change your selections below.
temperature
medium
options
programme chime medium
Temperature
high medium
low
extra low
Remember: As you use the touchscreen, if you feel you are lost, press Back or Home.
Review Screen – This screen reviews
your selections before starting the dryer,
and allows you to choose options to
further customise your drying
programme. You may press Start/Pause
to begin drying or press a displayed
choice to change previous selections.
Options Screen – There are four option
choices available, touch each option to
select or deselect it:
•
“Crease Prevent” - Intermittent
tumble in room temperature air for up to
two hours following the dry programme.
• “Damp Dry Chime” - Chimes when
load is damp.
• “Reminder Chime” - Chimes at the
end of the programme every 5 minutes
for up to two hours.
• “End Chime” - Chimes once when the
selected dryness level is reached.
Press “Continue” to return back to the
review screen.
Step 4 Step 5
dryness level
normal dry
Press "Start/Pause" or
change your selections below.
temperature
medium
options
end chime medium
end chime
medium
Options
continue
crease prevent
reminder chime
If you are satisfied with the selections,
press the Start/Pause touchpad to
begin the programme.
Step 6
OPERATING INSTRUCTIONS CONT.