Filter
Top Products
9
MORE CYCLES
Touch “more cycles” on the
Home screen.
Step 1
SETTING WRINKLE RELEASE
sensor dry
Home
time dry
more cycles
air fluff
(no heat)
favorites
More Cycles offers the ability to choose “wrinkle release”, “freshen up”, and “dryel” cycles.
“wrinkle release” – will release wrinkles from items that are clean and dry but slightly wrinkled, such as from a crowded closet or
suitcase or from sitting in the dryer too long after the end of the cycle. It provides 8 minutes of heated tumbling and 10 minutes of
cool down tumbling without heat.
Select “wrinkle release”.
Step 2
wrinkle release
freshen up
Dryel
®
More Cycles
Review Screen – The default settings for “wrinkle
release” are 18 minutes of tumbling using regular
temperature heated air. You may press Start/Pause to
begin or select any of the areas on the touchscreen to
further customize the “wrinkle release” cycle.
Step 3
wrinkle release
18 minutes
regular
temperature
options
Press "Start/Pause" or
change your selection below.
Touch the up or down arrow to
set the time to tumble. The time
will increase or decrease by one
minute increments. Press
“continue” when done.
wrinkle release
18 minutes
regular
temperature
options
Press "Start/Pause" or
change your selection below.
Time
continue
18
minutes
Touch the appropriate
temperature for the load.
wrinkle release
18 minutes
Press "Start/Pause" or
change your selection below.
regular
temperature
options
Temperature
regular medium
delicate
extra low
Options Screen – The following options may be added
to customize your “wrinkle release” cycle:
• “wrinkle prevent”
• “end of cycle chime”
• “remind chime”
See page 7 for a detailed description of these options.
When the desired selections are made, touch
“continue” to see the review screen once again.
loud end
of cycle chime
Options
continue
remind chime
on off
wrinkle prevent
on off
Touch “more cycles” on the
Home screen.
Step 1
SETTING FRESHEN UP
sensor dry
Home
time dry
more cycles
air fluff
(no heat)
favorites
“freshen up” – the “freshen up” cycle is designed to activate a fabric softener sheet. There are 5 minutes of heated tumble
followed by 10 minutes of tumble in unheated air.
Add a fabric softener sheet to the
load. Select “freshen up”.
Step 2
wrinkle release
freshen up
Dryel
®
More Cycles
Review Screen – The default settings for “freshen
up” are 15 minutes of tumble using extra low
temperature heated air. You may press Start/Pause to
begin or select any of the areas on the touchscreen to
further customize the “freshen up” cycle.
Step 3
freshen up
15 minutes
extra low
temperature
options
Press "Start/Pause" or
change your selection below.