Filter
Top Products
6
Step 5 Start the Dryer
Start/Pause – Close the door and press the
Start/Pause pad to start the dryer. Pressing Off cancels
the cycle and stops the dryer.
To interrupt a running cycle, press the
Start/Pause pad
again.
ESTIMATED TIME DISPLAY
• After pressing Start/Pause, the display will show the
estimated time remaining in the cycle.
INDICATOR LIGHTS
•
The indicator lights beside the settings will light when the
selection is made.
•
The
Cool Do
wn
indicator light will illuminate when the
dr
y
er mo
v
es into the cool-do
wn por
tion of the cycle.
•
If the
W
r
inkle Prevent
option has been selected,
the
W
r
inkle Prevent
light will illuminate to indicate that
the load is dry and the dryer has moved into the wrinkle
pre
vent portion of the cycle (see Step 4).
Wrinkle Prevent – Provides approximately 95 minutes of
i
ntermittent tumbling in unheated air at the end of the cycle
to reduce wrinkling.
End of Cycle Signal – The end of cycle signal is adjustable.
Press the “+” or “–” signal pad to increase or decrease the
volume of the signal.
Step 4 Select Options
UU
SING THE CONTROLS
NOTE: If the dryer has not reached the cool down portion
of the cycle, pressing Start/Pause will pause the cycle
indefinitely. If the dryer has moved to cool down, the time will
continue to count down to zero.
Start/Pause
Set Drying Time
Time Dry
Cycle Options