Filter
Top Products
10
DD
RYING RACK (SELECT MODELS)
On Dry
er Sides:
The dr
ying rack hanger fits betw
een the dr
yer top and the
dr
y
er cabinet.
1)
Place the flange on the hanger in the seam betw
een the
top and the cabinet. Push all the way in.
2) Face the top of the drying rack toward the side of the
dr
y
er cabinet.
3)
Place the dr
ying rack handle over the lip of the hanger.
On Dry
er Back:
1)
Place the dr
ying rack hanger betw
een the dr
y
er top and
the dryer cabinet just below the back of the control
panel.
2) Place the flange in the seam and push all the way in.
3)
Face the top of the dr
ying rack to
war
d the back of the
dryer cabinet.
4)
Place the dr
ying rack handle on the lip of the hanger
.
Heat
Heat
Air Fluff
Air Fluff
Air Fluff or Heat
Washable sweaters (block to
shape and lay flat on rack)
Stuffed toys (cotton or
polyester fiber filled)
Stuffed toys (foam or
rubber filled)
Foam rubber pillows
Sneakers
SUGGESTED ITEMS
SUGGESTED
TEMP. SETTINGS
Rear Legs
Front
Handle
Flange
Lip
NOTE: If not included with your dryer, contact your Maytag dealer for the accessory kit MAL1100AXX
or call
1-877-232-6771 USA or 1-800-688-8408 Canada.
INSTALLING THE DRYING RACK
1) Open dryer door.
2) Position drying rack in tumbler placing the two rear legs
in the two recessed areas in the back wall of the dryer.
3) Place the front lip of the drying rack on top of the lint
filter.
4) Place items to be dried on the rack, leaving space
between them so air can reach all the surfaces.
5) Close the dryer door.
6) Use the Time Dry cycle. Select time according to
moisture and weight of item. Start the dryer. It may be
necessary to reset the timer if a longer drying time is
needed.
STORING THE DRYING RACK
USING THE DRYING RACK
Drying foam rubber, plastic or rubber on a heat setting may
cause damage to the item and could lead to a fire hazard.
WARNING