Filter
Top Products
OPERATING TIPS
tUAN THE LINT fllTER
l
After each load.
. To shorten drying time.
l
To operate more efficiently.
LOAD THE DRYER PROPERLY
l
By placing only one wash load in the
dryer at a time.
l
Avoid very small loads or mixing
heavyweight and lightweight clothes.
. When only one or two articles need
drying, add a few similar items to
improve tumbling and drying efficiency.
l
When drying large, bulky items such
as a blanket or comforter, it may be
necessary to reposition the load during
the cycle to ensure even drying.
CHECK THE MOISTURE
MONITOR
Indicator lights in the moisture monitor will
display when an IntelliDry cycle is in oper-
ation. The top light will blink on and off. As
loads dry, there will be longer pauses
between each blink. No lights will display
during Time Dry or Air Fluff.
The bottom light in the monitor will remain
on until the cool down portion of the cycle
starts. During cool down the dryer contin-
ues to tumble the load in unheated air to
help minimize wrinkling.
NOTE:
Do not operate the dryer
without the lint filter in place.
MOISTURE MONITOR
MORE
LESS
NOTE:
The top monitor light
may not blink when small loads
of heavy, bulky items are dried,
such as rugs or sweaters.
ADD A
fABRi( SOFTE~IER
SHEET (If DESIRED)
l
After loading the dryer.
l
To control static cling.
l
Before the load becomes warm.
This helps prevent greasy-looking
softener stains.
l
And remove any used softener
sheets from the dryer to prevent
greasy-looking softener stains.
4