Filter
Top Products
8
Using the Controls – Dryer
Select Cycle
WRINKLE RELEASE will release wrinkles from items
that are clean and dry but slightly wrinkled. This cycle
is for clothes from a crowded closet or suitcase or from
sitting in the dryer too long after the end of the cycle. It
provides 10 minutes of heated tumbling and 5 minutes
of cool-down tumbling without heat. Press the
START
button for the cycle to begin.
DAMP DRY is designed to “partially” dry items. It
provides approximately 20 minutes of heated tumbling
and 5 minutes of cool-down tumbling without heat.
Press the
START button to begin tumbling.
TIME DRY may be selected for any load if the
IntelliDry sensor system is not desired. Set the control
to the desired number of minute
s and choose the
appropriate drying temperature for the load. Then
pre
ss the
START button.
AI
R FLUFF
provide
s tumbling without heat for
sensitive loads or items needing freshening. Examples
are: certain sweaters, shower cur
tains, camping gear,
pillows, etc. Set the control to the de
sired number of
minutes, up to 20 minutes, and press the
START
button.
IntelliDry PERM’T P
RESS
with P
ress Care
automatically senses the moisture in the load and
shuts off when the selected dryness level is reached.
Permanent Press minimizes wrinkles of man-made
fabrics such as acrylic, nylon, polye
ster, or blends with
an extended cool-down by tumbling the load in
unheated air at the end of the cycle. Simply set the
control to the de
sired dryne
ss level (more dry – le
ss
dry) and press the
START button. The middle ▲ is the
initial preferred setting for the majority of loads.
IntelliDry REGULAR FABRICS automatically senses
the moisture in the load and shuts off when the
selected dryne
ss level is reached. T
his c
ycle is
de
signed for loads such as towels, underwear, t-shirts,
jeans, etc. Set the control to the desired dryness level
(more dry – less dry) and press the
START button. The
middle ▲ is the initial preferred setting for the majority
of loads.
STEP 1