Filter
Top Products
30
CELSIUS OR FAHRENHEIT
The temperature is shown in the display either
in degrees Celsius or in degrees Fahrenheit.
You can change between Celsius and Fahren-
heit as follows:
Turn off the main power switch
and
then turn it on again so that the machine is in
stand-by mode.
Press the
Enter
button five times, and then
press the
P2
button five times. These ten pres-
ses must be completed within 15 seconds.
Within three seconds after pressing the
P2
button for the last time, you must then use the
buttons to index to your desired al-
ternative.
RESET PROGRAMME
If you wish to revert to the settings which a pre-
set programme had at the time when the dryer
was supplied, you can reset the programme.
1. Hold down the programme button (P1-P4)
for the programme that you wish to reset.
2. Press the
Enter
button once.
3. Release the programme button.
The programme for the button concerned
will now have reverted to its settings at the
time when the dryer was supplied.