Filter
Top Products
24
Display shows Explanation
No programme selected.
One or two digits, followed by an h.
Delayed start is selected, and the programme has started.
The display shows the number of hours remaining to start of
the programme.
One digit, one H followed by two digits or only 1-2
digits, indicates that a programme is running.
The display shows the remaining programme time in
hours and minutes.
Displayed when selecting temperature. The tempe-
rature can be displayed either in degrees Celsius (C)
or Fahrenheit (F).
CC and CF indicate that the machine is set for the
temperature of the incoming water.
To change the display, see the section Wash tempera-
ture – Celsius or Fahrenheit in this Chapter.
Programme complete. Take out the washing.
Can be displayed when selecting spin speed. Indi-
cates No spin/No drain. The programme will then
be run without spins and will be completed with the
final rinse water still in the machine.
Can be displayed when selecting spin speed. Indi-
cates No spin. The programme will then be run wit-
hout spins.
Displayed instead of temperature and spin speed
where these settings are not relevant. E.g. it is not
possible to select a temperature for the Rinse program-
me.
NORMAL INDICATIONS ON THE DISPLAY