Filter
Top Products
16
DURING THE PROGRAMME
If you wish to interrupt or change the
programme
Hold down the button for three se-
conds. An extinguished LED next to the button
indicates that the programme has been inter-
rupted.
Add more detergent, if necessary, before se-
lecting a new programme.
Putting in or taking out washing
If you wish to put in or take out washing after
you have started the machine, you must hold
down the
button for three seconds, when
the LED next to the button will light. Any wa-
ter will be pumped out, and the door can then
be opened. Put in more washing, add more de-
tergent, if necessary, and close the door. The
washing programme will restart automatically
from the point at which it was interrupted.
Changing settings after starting
It is possible for you to alter certain settings
and options after you have started the washing
programme.
Hold down the button for the setting or the
option for three seconds. The temperature is
shown in the display.
Within 15 seconds of releasing the button,
you must index forward to the new desired set-
ting.
In order to make an alteration, however, the
part of the programme that you wish to alter
must not have been activated yet.
- Programme – If the programme selector knob
is moved when the programme is running, this
will not affect the programme. You should in-
terrupt the programme instead.
- Temperature – can be altered before the main
wash has started.
- Spin speed – can be altered before the water is
pumped out after the main wash.
- Delayed start – cannot be altered. You should
instead interrupt the programme, change the
settings and restart the machine.
- Super rinse – can be altered before the water
is pumped out after the main wash.
- E2 – can be altered before the start of the
main wash.
-The Pre-soak option means that the washing
is left to soak for two hours before the pro-
gramme starts.