Maytag BRAVOSTM Washer User Manual


 
13
Stain Cycle
The Stain Cycle option uses Direct Inject Cleaning Action to help ensure better soil and stain
removal. Stain Cycle reduces the need for pretreatment and is safe for all washable fabrics.
Water flushes through the dispenser to dissolve the detergent. The detergent mixture is then
sprayed onto the load while the washer spins at low speed. This cleaning action will last up to
5 minutes depending on the cycle selected.
The washer then stops spinning, fills with water to the appropriate level and continues
washing with the selected cycle.
High Efficiency (HE) Detergent
This washer is designed for High Efficiency (HE) detergent use only. HE detergents are made to
produce the right amount of suds and give the best performance in low water wash systems.
Features
Innovative Features
Your new washer includes these features that help to reduce noise, increase the ease of use
and improve wash performance.
Electronic Controls
Electronic controls with preset cycles are easy to use whether you are a beginner or an
“expert.”
Quiet Operation
This washer is insulated with sound-dampening materials to reduce washer operation sounds
and noises. On some models, an additional tub wrap is added for extra dampening of
vibration and sound. The washer has an additional bottom sound pad that is included
separately for installation by the customer.
Suspension System
To reduce washer “walk” and “out of balance” conditions, your new washer combines:
4 Spring damper struts to isolate vibration
Balance ring at the top and bottom of the wash basket to minimize vibration
Operating software designed to sense and correct off-balance loads
Clean Washer Cycle
This washer features an easy-to-use Clean Washer cycle that thoroughly cleans the inside of
your washing machine using higher water volumes in combination with liquid chlorine
bleach.
Stainless Steel Basket
The stainless steel basket is corrosion resistant and enables higher spin speeds for more water
extraction, reducing drying time.
Self-clean Wash and Rinse Filter System
This washer filters 100% of the wash and rinse water. The water is filtered then recirculated.
The force filter traps sand and dirt, flushing them down the drain, so they are not redeposited
onto the clean clothes.
Delay Wash
Delay Wash allows you to load your washer and pause the start of the cycle for up to
10 hours.
End of Cycle Signal
The End of Cycle Signal produces an audible sound when the wash cycle is finished. This
signal is helpful when you are removing items from the washer as soon as it stops.