Filter
Top Products
P/No.3828FW3144A
8
INSTALLATION
Voltage change
(only for Dual voltage)
●
This washer can be adjusted to operate on a power supply of either 110(127) or 220
volts.
However, in order to avoid the danger of a fire and prevent damage to the washing
machine, the voltage setting must match the voltage of your power supply.
The present voltage is indicated on the label on the back of the washing machine.
●
To change the voltage setting, follow the procedure below.
1. Unplug the power cord from the electric outlet, being sure to take hold of the plug
itself.
2. Use a screwdriver to remove the back cover from the washing machine.
3. Remove the bag covering the lead wire couplers.
4. To change the voltage setting from 220V to 110(127)V, disconnect the coupler
marked "220V" and connect the coupler marked "110(127)V", to change the voltage
setting from 110(127)V to 220V, disconnect the coupler marked "110(127)V" and
connect the coupler marked "220V".
5. Cover the couplers with the bag and reattach the back cover.
6. Be sure to indicate the new voltage setting on the "Present Voltage" label for future
reference.