Filter
Top Products
¤ Remove pump outlet hose.
¤ŁRemove tub pump bellows.
¤ØRemove cap(Remaining Hose).
¤ŒDisconnect the wiring.
¤ºThree screws are unscrewed from the cabinet.
¤ Remove the pump to arrow direction.
¤ Loosen the nut.
¤ŁRemove washing heater by pulling out.
When assembling the washing heater, insert
the heater to heater clip on the bottom of tub.
¤ Pull it out by holding the thermistor bracket.
ƒT If holding the wire and pulling out it, it may be
broken.
PUMP
HEATER
THERMISTOR
Cap
(Remaining Hose)
Screw
Pump Outlet Hose
Tub Pump Bellows
Washing
Heater
Ring Terminal
Nut
Thermistor
Bracket
Thermistor bulb
CAUTION
36