HOW TO USE THE WASHER
14
Cycle Selector
• Press the Cycle selector to select cycle designed
for different types of fabric and soil levels.
• Each cycle has a preset Water Temperature, Spin
Speed, Soil Level, and Option (See page 13).
• The preset settings can be changed anytime
before Start.
NOTE: This front load washer requires longer cycle
time and gets clothes much cleaner, yet is
more gentle on the fabrics, than top load
washers. Washing time can be reduced
significantly for small loads or lightly soiled
loads by selecting Quick Cycle with the
Option button and setting the Soil Level
button at Light.
2. Cycles
• Use this button to turn the Power On/Off.
1. Power
• Use this button to start/stop the washer.
3. Start/Pause
• Select a water temperature based on the type of
load you are washing.
• Follow the fabric care label and chart below for
best results.
• Warm rinses leave the loads dryer than cold rinses.
Warm rinses increase wrinkling.
• In cold climates, a warm rinse makes the load more
comfortable to handle.
• Cold rinses save energy.
• The Cold rinse temperatures depend on the cold water
at your faucet.
• Warm rinses are regulated at approximately
86°F (30°C).
• For the Tap Cold/Cold setting, both wash and rinse
temperatures depend on the cold water at your faucet.
4. Wash/Rinse Temperature
• To change the spin speed, press the Spin Speed
button repeatedly to cycle through available
options.
• To start Drain/Spin cycle:
1. Press Power button to turn on.
2. Press Spin Speed button only.
3. Press Start/Pause button.
5. Spin speed
Suggested Wash Temp.
Garment
Hot Whites and Heavy
122°F (50°C) soiled color-fast items
Warm
Most loads
104°F (40°C)
Cold Brightly colored items,
77°F (25°C) washable woolens