Filter
Top Products
13
Please use the horizontal tap
Horizontal tap Extension tap Square tap
❿☎
Step3: Connect hose to washer
Installation
NOTE
•
After completing connection, if water leaks from the hose, repeat the same steps.
Use the most conventional type of faucet for water supply. In case the faucet is square or
too big, remove the spacing ring before inserting the faucet into the adaptor.
• Make sure that there are no kinks in the
hose and that they are not crushed.
❿☎
When your washer has two valves.
• The Inlet hose which has red connector is
for the hot water tap.
• If the washer has two valves, the energy is
saved by using hot valve.