Filter
Top Products
6
Safety Instructions
Installation Instructions
Operating Instruction
Troubleshooting Tips
Customer Service
INSTALLATION INSTRUCTIONS
Installation clearances
The location must be large enough to fully open the
dryer door.
Dryer Dimensions
* Most installations require a minimum 5
1
/
2
in.
(14 cm) clearance behind the dryer for the
exhaust vent with elbow.
Minimum installation spacing for a recessed
area, customized undercounter or closet
installation
The following dimensions shown are for the
minimum spacing allowed.
■ Additional spacing should be considered for
installation and servicing.
■ Additional clearances might be required for wall,
door and floor moldings.
■ Additional spacing of 1 in. (2.5 cm) on all sides of
the dryer is recommended to reduce noise
transfer.
■ For closet installation with a door, minimum
ventilation openings in the top and bottom of the
door are required. Louvered doors with
equivalent ventilation openings are acceptable.
Companion appliance spacing should also be
considered.
Closet installation - Dryer onlyCloset installation
50.5"
(128.27 cm)
43"
(109.22 cm)
27"
(68.6 cm)
30"
(76.2 cm)
31.5"1"
(2.54cm) (80.01cm)
3"
(7.6 cm)
1"
(2.54cm)
14" max
(35.6 cm)
18"
(45.72 cm)
3"
(7.6 cm)
48"
2
(310 cm
2
)
24"
2
(155 cm
2
)
27"
(68.6 cm)
0"
(0cm)
0"
(0cm)