KitchenAid 3405634 Clothes Dryer User Manual


 
9
Starting your dryer (cont.)
6. Push the Start button.
Stopping and restarting your dryer
You can stop your dryer anytime during a cycle.
To stop your dryer:
Open the dryer door or turn the Cycle Control knob
to Off.
NOTE: The Cycle Control knob should point to an
Off area when the dryer is not in use.
To restart your dryer:
Close the door, select a new cycle and temperature
(if desired), and push the Start button.
NOTE: Your dryer stops automatically when a
cycle ends.
Cycle and temperature tips
In the Automatic cycle (Sensor Dry), the FLO-
THRU
Drying System automatically reduces
the heat near the end of the cycle to prevent
overdrying.
If your dryer has a special Ultra Low or Extra Low
temperature setting, this reduces drying tempera-
tures and provides enhanced fabric care for
delicates and other fine fabrics.
If some types of loads in the cycle descriptions
have more than one suggested temperature
setting, choose the lowest setting available on
your dryer.
The last few minutes of all cycles are without heat
to make the load cooler to handle.
Selecting the right cycle and temperature setting
Drying tips
Make sure you have selected the correct cycle
and temperature for your load. For example,
select a High temperature setting for best drying
results with extra heavy items.
Always follow care label directions when they
are available.
If you use fabric softener sheets, always use
fabric softener sheets labeled as dryer safe and
follow package instructions carefully.
Remove the load from the dryer as soon as tum-
bling stops to reduce wrinkling. This is especially
important for permanent press, knits, and syn-
thetic fabrics.
Operating Your Dryer