Filter
Top Products
3. Wet a nylon brush with hot water and liquid detergent. Scrub 3. Use masking tape to secure dryer door.
lint screen with the brush to remove residue buildup.
4. Rinse screen with hot water,
5. Thoroughly dry lint screen with a clean towel. Replace screen
in dryer,
To clean dryer drum
1. Make a paste with powdered laundry detergent and very
warm water.
2. Apply paste to a soft cloth.
OR
Apply a liquid, nonflammable household cleaner to the
stained area and rub with a soft cloth until all excess dye and
stains are removed.
3. Wipe drum thoroughly with a damp cloth.
4. Tumble a load of clean cloths or towels to dry drum.
NOTE: Garments which contain unstable dyes, such as denim
blue jeans or brightly colored cotton items, may discolor the
dryer interior. These stains are not harmful to your dryer and will
not stain future loads of clothes, Dry unstable dye items inside
out to avoid dye transfer.
Emectricat Shock Hazard
Disconnect power before servicing.
Replace aimparts and panels before operating.
Failure to do so can result in death or emectrica_ shock.
For direct-wired dryers:
1. Disconnect power.
2. Disconnect wiring,
3. Make sure leveling legs are secure in dryer base.
4. Use masking tape to secure dryer door.
The dryer light automatically turns on inside the dryer drum when
you open the door,
To change the drum light
1. Unplug dryer or disconnect power.
2. Open the dryer door. Locate the light bulb cover on the back
wall of the dryer. Remove the screw located in the lower right
corner of the cover. Remove the cover.
From Inside the Dryer Cabinet
Lint should be removed every 2 years or more often, depending
on dryer usage. Cleaning should be done by a qualified person.
From the Exhaust Vent
Lint should be removed every 2 years, or more often, depending
on dryer usage.
Vacation care
Operate your dryer only when you are at home. If you will be on
vacation or not using your dryer for an extended period of time,
you should:
1. Unplug dryer or disconnect power.
2. Clean lint screen, See "Cleaning the Lint Screen."
Moving care
For power supply cord-connected dryers:
1. Unplug the power supply cord.
2. Make sure leveling legs are secure in dryer base.
3. Turn bulb counterclockwise, Replace the bulb with a 10-watt
appliance bulb only. Replace the cover and secure with the
screw,
4. Plug in dryer or reconnect power.
26