Filter
Top Products
11
Complete Installation
1. Check the electrical requirements. Be sure that you have the
correct electrical supply and the recommended grounding
method. See “Electrical Requirements.”
2. Be sure all parts are now installed. If there is an extra part, go
back through the steps to see which step was skipped.
3. Be sure you have all of your tools.
4. Dispose of/recycle all packaging materials.
5. Be sure the water faucets are on.
6. Check for leaks around faucets and inlet hoses.
7. Plug into a grounded 3 prong outlet.
8. Read “Washer Use.”
9. To test and to clean your washer, measure ¹⁄₂ the
manufacturer’s recommended amount of powdered or liquid
High Efficiency (HE) detergent for a medium size load. Pour
the detergent into the detergent dispenser. Select NORMAL/
CASUAL, and then select START. Allow the washer to
complete one whole cycle.
FEATURES AND BENEFITS
SENSOR SMART™ Electronic Controls
Flexible electronic controls are easy to use whether you are a
beginner or an expert.
Detergent Advantage System Dispenser
The three compartments in the dispenser allow loading of all
laundry products before the washer is started. The products will
be dispensed into the wash at the optimal time for
high-performance cleaning. TIMED BLEACH™ release is
included in the detergent advantage system. The detergent is
added at the beginning of the cycle, and the bleach is added
after the enzymes have had a chance to do their cleaning. The
fabric softener is dispensed in the rinse cycle. The Detergent
Advantage System Dispenser tray can easily be removed for
cleaning.
Auto Water Level
Adjusting to the size of the load, this feature allows the washer to
use the minimal amount of water needed to clean and rinse the
clothes. With a low water level, you can obtain the same results
with smaller amounts of laundry products. Because only the
required amount of water is used, the washer saves energy, too.
Larger Load Size
Since there is no agitator, you can wash larger, bulkier items such
as an average size sleeping bag, pillow or a large stuffed teddy
bear. You are also able to wash more clothes at one time, which
means fewer loads.
Suspension System
To reduce washer “walk” and “off-balance” conditions, your new
washer combines:
■ 2 Springs to isolate vibration
■ 4 Shock absorbers at the washer base to minimize movement
Stainless Steel Drum
The stainless steel drum eliminates corrosion and enables higher
spin speeds for more water extraction, helping to reduce drying
time.
High-Efficiency Wash System
Your new front-loading, high-efficiency washer saves time with
fewer, larger loads. It also conserves resources and lowers your
water and energy bills.
Spin Speeds
This washer automatically selects a spin speed based on the
cycle selected. This factory setting can be changed, however,
with up to six different spin speed choices.
Thermal Optimizer
The heating system ensures that the wash water is heated to the
preset temperature for the Heavy Duty, Whitest Whites, and
Sanitary cycles. It also provides “Stepped Cleaning” when using
the sanitary cycle. “Stepped Cleaning” starts the wash cycle with
warm water to remove stains (such as blood or grass). The water
continues to be heated in order to remove stains such as dirty
mechanical oil.
Add Clothes
This option is available in all wash cycles except Rinse/Spin,
Drain/Spin and Clean Washer. When this option is available at the
beginning of the cycle, the Add Clothes status light will illuminate
for the first 8 minutes. This washer allows a 8-minute period in
which other garments may be added to a load.
Dynamic Balance
A precision balancing system that allows the washer to reach
spin speeds of up to 1,300 rpm. The washer spins faster so that
clothes coming out of the washer will dry faster. In addition, if the
Dynamic Balance system detects off-balance loads during
spinning, it redistributes the clothes so that they are evenly
balanced.
Use only HE High Efficiency detergent.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING