Filter
Top Products
8
USK SIT 25803 - 080425
Figure 8: Attaching the iron holder: Align the holes
of the iron holder with the slots on the side of the
iron bracket, and push down to fix.
Figure 9: Attaching iron bracket to the frame: take
the assembled iron bracket (6), making sure the
iron holder faces towards the ironing board, then
align the two pillar connectors with main bracket
holes and push down to lock.
Figure 10: Assemble the pole:
Insert the pole into the hole at the top of the iron
bracket.
Figure 11: Attaching the hanger: Make the hanger
face the direction as in figure 11, align the hole of
the hanger with top of pole, then push it down
firmly.
Figure 12: Placing the iron. Place the steam iron on
to the iron holder.
Figure 13: Attaching the fabric brush accessory:
Turn it and make the bristle face toward you and
align it with brush hanger on the bracket, then
slide the brush into its position on the iron bracket.
Figure 14: Slide the ironing board cover onto
board from the front end
first, smooth out and
fasten. The cover will be
creased at first, but these
creases can be steamed
out the first time you use
the ironing station.