Filter
Top Products
10
USK SIT 25803 - 080425
STEAM SETTINGS
Figure 16
Both buttons can be either held down manually or locked into
position for ease of use when ironing or steaming for a lengthy period
of time. For ordinary steam, press and hold or press and lock the left
button.
For the steam jet first press and lock the steam button and then press
and lock the steam jet button. Should you only want a short burst of
steam, simply hold the steam jet button down for a few seconds
whilst using regular steam. These two buttons control the type of
steam output. To regulate the strength of the steam output, adjust
the knob on the top of the water reservoir.
REGULATING STEAM OUTPUT
The knob on the top of the water reservoir can be turned to control
the steam output at various levels between minimum and maximum.
When steaming, you can regulate the strength of the steam
according to type and thickness of fabric.
This knob also controls the moisture content of the steam. For steam
with a higher moisture content, turn the knob clockwise towards
maximum. For drier steam, turn the knob anti-clockwise towards
minimum. It is possible that some of the moisture will condensate
when the knob is turned all the way to maximum and this will
account for minor dripping, to prevent this, turn the knob slightly
back towards minimum.