Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don’t change the page numbering. Keep the
language integrity. Print only what is inside the frame.
8 USK DA 31750 - 110127
Assembly page 8/20
Fax +32 2 359 95 50
ANTI DRIP FEATURE
This iron is equipped with an anti drip feature that will protects fabrics
from water spotting even at low temperatures.
CARE AND CLEANING
• Clean the iron regularly according to the hardness of the water
and the frequency of use.
• Fill the water tank and put the thermostat in MAX position.
• Plug in the appliance. The pilot light will come on. Make sure the
steam dial is in "0" position. Put the iron in vertical position.
• Never use vinegar or other liquids to descale the iron.
• As soon as the pilot light goes out, hold the iron over a sink and
press the cleaning button (6). Steam, water and dust particles will
come out of the soleplate.
• When the water tank is empty, release the cleaning button.
• To clean the plastic parts of the iron when it has cooled down,
use a humid cloth.
• To clean the soleplate, make sure you use a product made
especially for this purpose. Never use abrasive products.
WHEN YOU HAVE FINISHED IRONING
• Turn temperature dial to “MIN” and unplug iron from electrical
outlet.
• With soleplate facing away from you, turn iron upside down to
empty water.
• Then store the hot iron on its heel rest so that any remaining
moisture will evaporate. When the soleplate has cooled down,
you can store the iron.