Filter
Top Products
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don’t change the page numbering. Keep the
language integrity. Print only what is inside the frame.
5 USK DA 31750 - 110127
Assembly page 5/20
Fax +32 2 359 95 50
CAUTION BEFORE FIRST USE
• The iron has been greased, and as a result, the iron may slightly
smoke when switched on for the first time. After a short while, this
will cease.
• Before using for the first time, remove any sticker or protective foil
from the soleplate. Clean the soleplate with a soft cloth.
• Keep the soleplate smooth: avoid hard contact with metal
objects (such as clothes rack, button and slide fastener).
FILLING THE WATER TANK
Use preferably demineralised water. If you want to use the steam
dial, fill the water tank as follows:
1) Unplug the iron from the outlet to let it cool down and set it
horizontally on a stable level surface.
2) Put the temperature dial to "MIN" and the variable steam dial to
the 0 setting.
3) To fill the water tank, open the lid of the filling opening and pour
water using a measuring cup. Never exceed the MAX mark
indicated on the appliance.
4) When ironing, unplug the appliance before refilling. Fill the water
tank by holding the appliance in horizontal position without
putting down the hot soleplate, unless you have a heat-resistant
base.
TEMPERATURE SETTINGS
• You can choose the temperature setting in function with the
cloth to iron.
• Plug in the iron. Choose the correct ironing temperature by turning
the fabric selector switch (7). The temperature indicator lights up.
Once the desired temperature has been reached, the
temperature indicator lamp will go out.
DRY PRESSING
• Put the variable steam dial on position 0.