Filter
Top Products
7 USK DA 31691 - 091222
• Turn the temperature dial clockwise into the required position.
• Turn the variable steam dial between and for minimum
steam or to the position for a larger amount of steam.
• Set the iron on its heel and wait until the temperature indicator
goes out.
Caution: Set the temperature dial within the steam range (' ' or
' '). If the temperature setting is too low, water may drip from the
soleplate.
Check the garment label before ironing because some cloths may
be damaged when exposed to steam or water.
SPRAY
• Produces a mist for removing stubborn creases.
• Spray can be used at any temperature setting and during
either dry or steam pressing. Press down the spray button to spray.
BURST OF STEAM
The burst of steam feature provides additional steam for
removing stubborn creases.
This button also allows you to iron delicate articles of clothing
vertically. This feature is called "vertical burst of steam". To do so,
hang your article of clothing on a hanger, keep the steam button
pressed and pass the iron to and fro in front of the article of clothing,
making sure that the soleplate does not come into contact with the
article of clothing. The distance between the soleplate and the
article of clothing depends on the kind of textile and the creases.
AUTOMATIC SHUT-OFF
The automatic cut-off device trips after the iron has been left for
approximately eight minutes in the upright position or unused for
approximately thirty seconds in the horizontal position. The light
comes on to indicate that the cut-off device has tripped. As soon as
you move the iron, the device turns off and the iron starts working
again.