JVC LT-32A61BJ Washer/Dryer User Manual


 
Remote control buttons and functions
15
LT-32/26A61BJ/SJ / LCT1999-001A-U / English
Choose a TV channel and
watch images from external
devices
Use the number buttons:
Enter the programme number (PR)
of the channel using the number
buttons.
Example:
•PR 6 press 6
PR 12 press 1 and 2
Use the p p buttons:
Press the p p buttons to
choose the programme number
(PR) you want or an EXT terminal.
Use the AV button:
Press the AV button to choose an
EXT terminal.
You can choose a video input signal from
the S-VIDEO signal (Y/C signal) and
regular video signal (composite signal).
For details, see “S-IN (S-VIDEO input)”
on page 37.
If you do not have a clear picture or no
colour appears, change the colour system
manually. See “COLOUR SYSTEM” on
page 26.
If you choose an EXT terminal with no
input signal, the EXT terminal number
becomes fixed on the screen.
Since this TV is designed to make full use
of the resolution of the original video
source, the motion may appear unnatural
when the video source is input with
progressive-scanning component signals.
If this happens, change the output setting
of the connected device to interlace-
scanning component signal output. See
the instructions that came with the device
for more information.
The PC sound is the same as the EXT-3
sound.
To return to a TV channel:
Press the b button, the 6 buttons or the
number buttons.
To use the programme number PR 0
(AV):
When the TV and VCR are connected only
by the aerial cable, choosing the programme
number PR 0 (AV) allows you to view
images from the VCR. Set the VCR RF
channel to the programme number PR 0
(AV) manually. For details, see “EDIT/
MANUAL” on page 32.
Pressing the G button changes the choice as
follows:
The VCR sends its playback image along
the aerial cable as an RF (radio frequency)
signal.
Also see your VCR instruction manual.
TV mode EXT modes
Programme
numbers
PR 1 – PR 99
or
EXT-1
EXT-2
EXT-3
EXT-4
TV mode EXT modes
Programme
numbers
PR 1 – PR 99
PR 0
or
LT-32&26A61BJSJ_Eng.book Page 15 Friday, October 14, 2005 1:40 PM