JVC LT-26A61BJ Washer/Dryer User Manual


 
SET UP menu
37
ENGLISH
LT-32/26A61BU/SU / LCT1996-001A-U / English
6 Turn on the VCR, and then press
the a button to transmit the data
to VCR
The T-V LINK menu disappears once the
data transmission ends.
If the DECODER (EXT-2) function has
been set to “ON” but the TV channel
cannot be unscrambled, check the
following:
Has the decoder been connected to the
VCR properly according to the VCR
and decoder instruction manuals?
Has the decoder power been turned
on?
Can the TV channel be unscrambled
with a decoder?
Do you need to change the VCR
settings in order to connect the
decoder? Confirm that the VCR is set
properly by rechecking the VCR
instruction manual.
EXT SETTING
1 Choose EXT SETTING, then press
the a or 3 button
The EXT SETTING menu appears.
2 Follow the instructions for the
function you want to use and
operate the function
S-IN:
You can enjoy the high-quality picture of
the S-VIDEO signal (Y/C signal).
DUBBING:
You can choose a signal source to be
output from an EXT-2 terminal.
S-IN (S-VIDEO input)
You can connect a device (such as an S-VHS
VCR) to enjoy the high-quality picture of the
S-VIDEO signal (Y/C signal).
Preparation:
First read the device’s instruction manual
and “Additional preparation” on page 40
to connect the device to the TV properly.
Second, follow the device’s instruction
manual to set the device so that it sends an
S-VIDEO signal (Y/C signal) to the TV.
Do not set S-IN (S-VIDEO input) to an
EXT terminal connected to a device
which cannot output an S-VIDEO (Y/C
signal).
D0020-EN
OK
EXT-1
DUBBING
EXT-2
>
EXT-3
TV
EXT SETTING
LT-32&26A61BUSU_Eng.book Page 37 Tuesday, October 11, 2005 6:07 PM