Filter
Top Products
15
Programme information
Soak 30°
This is a special programme for heavily soiled laundry.
The machine performs a soak of about 30 minutes at
30°C. At the end of the soak time the machine will
stop automatically with water left in the tub. The
display will show a flashing zero.
Pour the detergent for the soak programme into the
compartment marked .
Before starting a new washing phase, it is necessary to
empty the water by selecting the “Drain” programme.
This function cannot be used with Wool programmes.
Rinse
With this programme it is possible to rinse and spin the
garments which have been washed by hand. The
machine performs 3 rinses, followed by a final long spin
at the maximum speed.
Important!
The spin speed will automatically assume the setting for
cotton items. If required, reduce the speed to the
desired level by depressing the "Spin" button.
Softeners
Hand washed garments can be be starched or softened
with this programme.
The machine performs 1 rinse, followed by a final long
spin at the maximum speed which can be reduced by
depressing the “Spin” button.
The final spin is foreseen only for cotton items as in the
spin programme.
Drain
For emptying out the water of the last rinse in
programmes with the “Quiet” option or “Soak 30°”
programme. Turn first the programme selector dial to
“Off”, then select the “Drain” programme and
depress the “Start/Pause” button.
Spin
Separate long spin at the max speed for hand washed
garments. The spin speed will automatically assume the
setting for cotton items. You can reduce the speed by
means of “Spin” button to adapt it to the fabrics to be
spun.
30 Minute wash
This is a complete programme that can be combined
with the following options:
“Spin” speed reduction, “Quiet” and “Delay start”.
To be used for laundry which is lightly soiled or which
needs freshening up.
Max. load 2 kg.
Washing temperature 30 C.
Programme duration 30 minutes.
Final spin speed 700 rpm.
Off = Reset / Switching the machine off
To reset a programme turn the selector dial to “Off”.
Now can a new programme be selected.