Filter
Top Products
8
The control panel
1 Programme/time selector dial
Allows you to select electronically controlled or time
controlled drying.
Turn the dial to the required programme or time.
Electronically controlled drying (automatic)
The appliance runs these programmes with the help of
sensors which detect the degree of dampness of the
laundry.
Simply select the programme according to the type of
laundry and degree of drying required.
Time controlled drying
This can be used to finish off drying if necessary.
Select the 30 minute programme for cottons or
synthetics.
To cancel a programme which is running, turn the
programme selector dial to “Off”.
At the end of drying, turn the selector dial to “Off” to
switch the machine off before removing the laundry.
If the programme selector dial is turned to another
position, when the machine is running, the buzzer will
sound and the programme phase indicator lights will flash.
2
Intensive button
For gentle drying of frequently-worn textiles. Programme
starts on full heat setting, which is then reduced towards
the end of the programme to ensure gentle care of
laundry.
3 Half Power button
Pressing this button allows drying to be performed at a
lower temperature, for delicate items.
The corresponding pilot light comes on.
This option can also be used for time controlled drying.
This option cannot be selected with QUICK and
INTENSIVE programme.
4 Quick dry button
By pressing this button the drying time is reduced in all
COTTONand SYNTHETICS programmes
The corresponding pilot light comes on.
This option cannot be selected with HALFPOWER
function.
5 Alarm off button
A buzzer sounds
• When selecting the programme
• When pressing the buttons
• When an incorrect option selection is made
• When the programme selector dial is turned to another
position during the programme or when you press an
option button during the cycle
• At the end of the programme
• When the water reservoir is full
• If the machine is not working correctly
• When the small door at the bottom is open.
By pressing the button the acoustic signal is switched off.
The corresponding light comes on
.
6 Time button
This option can be used for WOOL and RACK DRY
programmes.
Select the required programme run time, settable
with an interval of 10 min, from 30 min. up to 180
minutes.
Press the TIME button as many times as necessary
until the required programme running time is
shown in the display
7 Delay start button
By pressing the DELAY START button, the start of a
programme can be delayed by between 30 minutes (30')