Filter
Top Products
Starting the programme
Press the Start/Pause button. The
programme starts.
The programme progress is shown by
elapsing Dry time on LCD.
Changing programme
To change a programme which has been
selected by mistake once the programme
has started, first turn the programme
selector to Off and then reset the programme.
The programme can no longer be
changed directly once the
programme has started. If however
there is an attempt to change the
programme on the programme knob,
the programme progress display and
the maintenance indicators flash. If an
option button (excluding the Alarm
button) is pressed, Err appears in the
multidisplay.
The drying programme is not
however affected by this (laundry
protection).
Putting in extra items or
taking items out before
end of programme
1. Open loading door.
Warning! Laundry and drum can
become hot. Risk of burns!
2. Load or remove laundry items.
3. Close loading securely. Lock must
audibly lock.
4. Press the Start/Pause button to continue
the drying cycle.
Drying cycle complete /
removing laundry
Once the drying cycle is complete, the
display shows the anti-crease icon and
flashing "0" as well as warning lamps: Filter
and Full tank . If the Alarm button has been
pressed, an acoustic signal sounds
intermittently for about one minute.
15