Filter
Top Products
17
• An incorrect option selection has been made:
this is indicated by the message Err when a function
incompatible with the current programme is selected.
• An alarm code indicates a fault in the machine
operation (see page 31, "Something Not Working").
11 Programme phase indicator
lights
When you select a programme, the lights relevant to
the phases that form the programme light up.
After you have started the programme, only the light
relevant to the phase that is currently being carried out
will remain lit.
When the washing or drying programme has finished,
the “End” light comes on and a flashing zero appears
on the display. The light of the ‘Start/Pause is off.
End
Prewash
Wash
Rinse
Rinse hold
Drain
Spin
Drying
E20
Important!
If you turn the programme selector dial to another
programme when the machine is working, all the lights
of the programme progress display will flash for about 2
seconds but the machine will not perform the new
selected programme.
12 Programme selector dial
The programme selector dial is divided into the
following sections:
• Cottons,
• Synthetics,
• Delicates
• Wool
/
Hand washing
• Special programmes from “Soak 30°” to
“30 Minute wash”
• Reset programme “Off”
The selector dial can be turned either clockwise or
anticlockwise to select the required wash and drying
programme .
“Economy” position corresponds to an ENERGY
SAVING programme and “Cold” to a cold wash.
Before setting the dial to any position ensure that the
machine is turned to the “Off” position.
Important!
At the end of the programme the selector dial
must be turned to position “Off”.
Synthetics
Cold
30°
40°
Wool
Spin
Drain
Softeners
Rinse
Soak 30°
Delicates 30°
30 Minute wash
Delicates 40°
90°
Economy 60°
Economy 40°
60°
40°
30°
60°
40°
Economy 40°
Easy iron 40°
Cottons
Drying
Drying
Off