Filter
Top Products
7
GB
Important
Information Installation Description
The Display
Start and
Programmes Laundry
Warnings and
Suggestions
Troubleshooting Ser
vice
Maintenance
and Care
The Display
Programme progress
Timed drying
After selecting a programme that has a Timed Dry option, press the Timed button and the display will increment the
selected time, each time you press and release the button (see Start and Programmes).
Delay and Time to End
Some programmes can have a delayed start (see Start and Programmes). Press the Delay Timer button and the icon flashes.
The second line of the display shows the status of the programme as it progresses:
(long messages scroll across the line)
If the Mixed Dry option is available and selected this line displays when the different dryness levels have been
reached:
PRE CARE
DRY
COOL TUMBLE
END OF CYCLE, POST CARE PHASE
END OF CYCLE, EMPTY THE WATER BOTTLE
IRON DRY REACHED
HANGER DRY REACHED
Each press advances:
then , and then repeats.
Delicates have a maximum time of:
The bars to the right of the time, light to give an indication of
the time duration selected:
The selected time remains displayed after the programme
starts.
1:40
o:20 0:30 1:00 1:30 2:00 2:40 3:00
OFF
0:20 0:30 1:00 1:30 2:00 2:40 3:00
Each press of the Delay Timer button advances the delay
setting in 1 hour increments, from: to , then
and then after a couple of seconds cancels the delay.
The delay time is shown on the display next to the Delay Timer
button.
The display counts down the minutes of the delay period after
the Start/Pause button is pressed.
The second line of the display shows STARTS IN
1h 24h
After the delay period finishes (or for all of the programme if delay not selected): The estimated Time to End of the
programme for automatic programmes or the actual time remaining during the Timed programme is shown in this part of
the display.
(if option Pre Care
available and selected).
(if option Post Care
available and selected).