Filter
Top Products
8
GB
Wash cycles
Table of wash cycles
Wash cycles
Description of the wash cycle
Max.
temp.
(°C)
Max.
speed
(rpm)
Detergents
Max.
load (kg)
Residual
dampness
%
Energy
consum-
ption kWh
Total water lt
Cycle
duration
Wash
Fabric
softener
Daily
1
White Cotton: extremely soiled whites. 90° 1200
5 53 1,57 56 130’
2
Cotton Standard 60° (1): heavily soiled whites and resistant colours. 60° 1200
5 53 0,89 44 165’
3
Cotton Standard 40° (2): lightly soiled whites and delicate colours. 40° 1200
5 53 0,80 61 160’
4
Synthetics: heavily soiled resistant colours. 50° 800
2,5 - - - 95’
4
Synthetics (3): lightly soiled resistant colours. 40° 800
2,5 44 0,47 38 90’
5
Mix Colored: lightly soiled whites and delicate colours. 40° 1200
5 53 0,59 48 80’
20° Zone
6
Cotton Standard 20°: lightly soiled whites and delicate colours.
20°
1200
5 - - - 170’
7 Mix Light
20° 800
5 - - - 120’
8 20’ Refresh
20° 800
1,5 - - - 20’
Special
9 Outwear
30° 400
-
1,5 - - - 50’
10
Wool: for wool, cashmere, etc.
40° 800
1 - - - 65’
11 Jeans
40° 800
2,5 - - - 70’
Sport
12 Sport Intensive
30° 600
2,5 - - - 85’
13 Sport Light
30° 600
2,5 - - - 60’
14 Special Shoes
30° 600
Max. 2
pairs
- - - 55’
Partial wash cycles
Rinse - 1200 -
5 - - - 36’
Spin + Drain - 1200 - - 5 - - - 16’
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual
duration can vary according to factors such as water temperature and pressure, the amount of detergent used, the amount and type of load inser-
ted, load balancing and any wash options selected.
1) Test wash cycle in compliance with directive 1061/2010: set wash cycle 2 with a temperature of 60°C.
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be
used for garments which can be washed at 60°C. The actual washing temperature may differ from the indicated value.
2) Test wash cycle in compliance with directive 1061/2010: set wash cycle 3 with a temperature of 40°C.
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be
used for garments which can be washed at 40°C. The actual washing temperature may differ from the indicated value.
For all Test Institutes:
3) Long wash cycle for cottons: set wash cycle 3 with a temperature of 40°C.
4) Synthetic program along: set wash cycle 4 with a temperature of 40°C.