Filter
Top Products
GB
9
Description of the wash cycle
Max
.
temp.
(°C)
Max.
speed
(rpm)
Drying
Detergents Max. load (kg)
Cycle
duration
Wash
Fabric
softener
Normal
Eco
Time
Daily
1
White Cotton: extremely soiled whites.
90° 1400
zzz
7
-
1
White Cotton (1): heavily soiled whites and resistant colours.
60° 1400
zzz
7
-
1
White Cotton (2): heavily soiled whites and delicate colours.
40° 1400
zzz
7
-
2
Cotton: heavily soiled whites and resistant colours.
60° 1400
zzz
73,5
3
Coloured Cotton (3): lightly soiled whites and delicate colours.
40° 1400
zzz
73,5
4
Synthetics: heavily soiled resistant colours.
50° 800
zzz
32
Special
5
Wool: for wool, cashmere, etc.
40° 600
-
zz
1,5
-
6
Silk/Curtains: for garments in silk and viscose, lingerie.
30° 0
-
zz
1
-
7
Jeans
40° 800
zzz
3
-
Sport
8
Sport Intensive
30° 600
--
z
3 -
9
Sport Light
30° 600
-
zz
3 -
10
Special Shoes
30° 600
-
zz
Max. 2
pairs
-
Dry
11
Cotton
--
z
--
5 -
12
Synthetics
--
z
--
3 -
13
Express Wash & Dry
30° 1400
zzz
0,5
-
Partial wash cycles
Rinse - 1400
z
-
z
7
-
Spin - 1400
z
--
7
-
Drain - 0
---
7
-
Wash cycles and options
Wash options
Selecting this option enables you to suitably adjust
drum rotation, temperature and water to a reduced
load of lightly soiled cotton and synthetic fabrics (refer
to the
"Table of wash cycles"
). “ ” enables you to
wash in less time thereby saving water and electricity.
We suggest using a liquid detergent suitably measured
out to the load quantity.
! This function may not be used in conjunction with
cycles 1, 5, 6, 7, 8, 9, 10, 11, 12, 13,
, , .
Intensive Wash
Because a greater quantity of water is used in the
initial phase of the cycle, and because of the
increased cycle duration, this function offers a high-
performance wash.
!
This function may not be used in conjunction with
cycles 5, 6, 7, 8, 9, 10, 11, 12, 13,
, , .
Easy iron
By selecting this function, the wash and spin cycles
will be modified in order to reduce the formation of
creases. At the end of the cycle the Washer-dryer will
perform slow rotations of the drum; the indicator lights
Table of wash cycles
for the EASY IRON and START/PAUSE options will
flash (the first one green, the second orange).
To end the cycle, press the START/PAUSE button or
the EASY IRON button.
For the 6 wash cycle, the machine will end the cycle
while the laundry is soaking and the EASY IRON and
START/PAUSE indicator lights will flash. To drain the
water so that the laundry may be removed, press the
START/PAUSE button or the EASY IRON button.
!
This function may not be used in conjunction with
cycles 5, 8, 9, 10, 11, 12, 13,
, .
Note: If you also want to run the drying cycle, this option
is enabled only if combined with level “A1” (Iron dry).
Delay start
To set a delayed start for the selected cycle, press
the corresponding button repeatedly until the required
delay period has been reached. When this option is
enabled, the corresponding indicator light will remain
lit. To remove the delayed start setting, press the
button until the text "OFF" appears on the display.
!
This option can be used in conjunction with all
cycles.
The duration of the wash cycles can be checked on the display.
Wash cycles
The information contained in the table is intended as a guide only.
For all Test Institutes:
1) Test wash cycle in compliance with regulation EN 50229: set wash cycle 1 with a temperature of 60°C.
2) Long wash cycle for cottons: set wash cycle 1 with a temperature of 40°C.
3) Short wash cycle for cottons: set wash cycle 3 with a temperature of 40°C.