Filter
Top Products
Installation
Description
Start and
Programmes Laundry
Warnings and
Suggestions
Maintenance and
Care Troubleshooting Service
GB
3
Control panel
To open the door The features
Drying Guide
TIMER
Knob
START
Button
Indicator
Empty Water
Light
Press and release the front
panel in position shown
The Empty Water indicator light signals that the
water container is full and must be emptied.
The light will take a few seconds to go out after replacing
the empty water container, the dryer must be running
for this to happen.
The TIMER knob sets a drying time.
Rotate it clockwise, never counter-clockwise, until
the indicator is pointing to the drying time you want to
select (see Start and Programmes).
Dryer Description
The START button begins drying a selected
programme (see Start and Programmes).
The HEAT button selects drying temperature (see
Start and Programmes).
IN: HIGH heat
OUT: LOW heat
The Drying Guide allows you to consult a user
friendly table of fabric types and load capacities.
Cottons
Synthetics
or Acrylics and other delicates
HEAT
Button
Water container
Air intake
grille
Rating plate
Door catch
Filter
Door latch
Model &
Serial
numbers
Condenser cover handle
(Pull to open)
Condenser cover