Filter
Top Products
2 Pour fabric softener
into the compart-
ment marked
(must not exceed
the «MAX» mark in
the drawer).
Close the drawer gently
Select the required programme by turning
the programme selector dial (1)
The appliance is now switched on. The indi-
cator light of button 5 starts to blink.
At the end of the programme the selector
dial must be turned to position O, to switch
the appliance off.
For the description of each wash cycle,
the compatibility among the washing
programmes and the options, consult the
chapter «Washing Programmes».
Caution! If you turn the programme
selector dial to another programme
when the appliance is working, the red
indicator light of button 5 will blink 3 times
and the message Err appears on the
display to indicate a wrong selection. The
appliance will not perform the new selected
programme.
Reduce the spin speed or select the No
Spin or Rinse Hold by pressing button 10
By selecting a programme, the appliance
proposes automatically the maximum spin
speed provided for that programme.
Press button 10 repeatedly to change the
spin speed, if you want your laundry to be
spun at a different speed. The relevant indi-
cator light illuminates.
Select the available options by pressing
buttons 6, 7, 8 and 9
Depending on the programme, different
functions can be combined. These must be
selected after choosing the desired pro-
gramme and before starting the pro-
gramme.
When these buttons are pressed, the corre-
sponding indicator lights illuminate. When
they are pressed again, the indicator lights
go out. If an incorrect option is selected, the
integrated red indicator light of the button
5 flashes for 3 times and the message Err
appears on the display.
For the compatibility among the wash-
ing programmes and the options see
chapter «Washing Programmes».
Select the Delay Start by pressing button
4
Before you start the programme, if you wish
to delay the start, press this button to select
the desired delay.
The selected delay time value will appear
on the display for a few seconds, then the
duration of the programme will appear
again.
You must select this option after you have
set the programme and before you start the
programme.
You can cancel or modify the delay time at
any moment, before you press button 5.
Selecting the delay start :
1. Select the programme and the required
options.
2. Select the delay start by pressing but-
ton 4.
3. Press button 5:
– the machine starts its hourly count-
down.
– the programme will start after the se-
lected delay has expired.
Cancelling the Delay Start after having star-
ted the programme:
1. Set the washing machine to PAUSE by
pressing button 5.
2. Press button 4 once. On the display will
appear
'.
3. Press button 5 again to start the pro-
gramme.
ENGLISH 12