Filter
Top Products
Symbols On Dd Tray
Pre - Wash
Main Wash
Additive
Programme Selection
1. Cotton wash programmes (Linen)
Stage i : Pre - Wash -
qThis cycle takes place before the main wash.
qTo be used for heavily soiled clothes, which are given a
preliminary wash.
qDetergent to be filled in compartment l (extreme right ).
qAt the end of this pre-wash the dirty water is pumped out
automatically.
qIN CASE CLOTHES ARE NOT HEAVILY SOILED, THE “PRE-
WASH” CAN BE AVOIDED BY SETTING THE PROGRAMME
SELECTOR KNOB TO ANY OF THE MAIN WASH
P R O G R A M M E S A S G I V E N B E L O W A N D
DETERGENT FILLED ONLY IN THE MAIN WASH CHAMBER
MARKED ll (EXTREME LEFT)
Stage Il: Main Wash - Normal / Light / Quick
qMain wash starts with detergent being drawn from the
extreme left compartment of the detergent dispenser tray.
qClothes are soaked for 10 minutes.
q IF CLOTHES ARE NOR VERY DIRTY, THE MAIN WASH CAN
BE STARTED BY DIRECTLY SETTING THE PROGRAMME
SELECTOR KNOB AT LIGHT/QUICK TO REDUCE WASHING
TIME & ENERGY CONSUMPTION
qMain wash is completed with Intermittent short spin of 600
rpm max.
II
I
I
II
18
Fabric Conditioner
Fabric softner, Whitening, Enzyme, Disinfectants, bleaching, etc.
qFill in the middle chamber of detergent dispenser tray marked
qConditioner should be in liquid/solution form only (powders to
be mixed in water.)
qFabric softner gives a soft feel and smooth surface to fabrics.
qWhitener gives ‘Whitness’ to white clothes and brightness to
coloured clothes.
qEnzymes help to remove stains of sweat, blood etc.
qChlorine bleach is used for whites clothes and oxygen bleach
is used for
coloured clothes.
qA strong bleaching agent is not recommended for direct use in
the washing machine.
qExtremely dirty areas in cloths can be pretreated with bleach
and then be loaded in the machine for a regular wash.
Treatment Of Stains
qStains need to be treated immediately when they are fresh.
Usually stains are categorised as absorbed stains, built-up
stains, and compound stains.
qAbsorbed stains can be removed by rubbing gently a pad
containing a suitable solvent over the stain from outer edge
towards centre by keeping stained cloth on absorbent fabric.
qBuilt up and compound stains may be removed by first
carefully brushing off stained area. Then rub gently with a pad
containing solvent from the back of fabric.
qIt is advisable to try out the solvent on hidden part of the
garment to verify its effect on cloth.
27