5
After end of inlet hose installation, do not immediately switch on the power. Open the tap and let water go
over both ends of the inlet hose and check whether occur the leakage. If the inlet hose is difficult to install
because of the tap , you can invite the experienced person for help.
The method of installation for the double water inlet hose is same.
SIMPLE INSTALLATION
Notices:
Cabinet
Fixing ring
Leading ring
Drain hose
Inner hose
Installation of drain hose
Nip the fixing ring with hand to make it loose and engaged on
the drain hose and put the drain hose into the leading skirt of drain
hose in the bottom of the washing machine to the end at the most
(soak the head of the drain hose in warm water, it will make the
engagement easy), and loose the fixing ring to let it clasp the drain
hose.
It had better put the outlet of the drain hose into the nearby
drainage permanently, which can save the trouble that the drain
hose has to be connected each time before use. If the drainage is
far from the washing machine, it can be solved by connection of the
drain hoses head with end to extend.
6
SIMPLE INSTALLATION
Notices:
Drain faults will be caused when the drain hose is blocked.
Installation of the water inlet hose
1. Check the tap mouth. If it is not even, it can be filed even.
2. Screw loose the locking ring, but do not let the locking ring drop off. Screw the four screws at the same
distance.
3. Put the universal connector into the tap and stick to the tap mouth at the most and then screw in the screws.
4. Screw tight the locking ring to the right.
5. Pull the skirt of one end of the water inlet hose downwards, and then plug in the universal connector. A sound of
"
6. Grasp the water inlet hose by hand and pull it downward to see whether it is secured
7. Screw the nut on the other end of the water inlet hose into the water inlet of the washing machine to the most.
KA-TA" means proper connection.
Tap
File
If the calibre of the tap
is big, the connecting
ring can be taken off.
Connecting ring
Locking ring
Skirt