Filter
Top Products
Door Locked Indicator light
The ‘Door Locked’indicator light will come on two seconds
after you press the ‘START/Hold To Reset’ button and will
stay lit throughout the programme. A short time after the
programme has finished the indicator light will go out and
you can then open the door.
Door not closed
The programme will not start if the door is not closed
properly, the ‘Door Locked’indicator light will be flashing to
show this. Please make sure that the door is properly closed
by pushing it until you hear the catch click.
WARNINGS:
●
Do not try to
open the
door while
the ‘Door
Locked’
indicator light
is on.
●
Do not allow
children to
play with the
machine or
tamper with
the controls.
●
If you cancel a
programme
part way
through a
wash or there
is a power
cut,take care
when
opening the
door. The
machine may
contain hot
water.
●
In the unlikely
event of
something
not working
see the
Trouble -
shooting
section.
Progress indicators
Door Lock Indicator Light
OFF position
Wash programmes
PROGRAMMES
AND OPTIONS
15
On-Off / Selecting a programme
The machine is switched on,by turning the programme
selector dial away from the ‘OFF’ position, to your selected
programme. To start the programme press and release the
‘START/Hold To Reset’ button.
When the programme has finished return the programme
selector dial to the ‘OFF’ position.
To pause or change a programme
To pause a programme hold the ‘START/Hold To Reset’ but-
ton for two seconds until the ‘End’light flashes. To continue
press the ‘START/Hold To Reset’button once more.
If you want to change a programme,hold the ‘START/Hold
To Reset’button for two seconds until the ‘End’light flashes.
You can then change the programme. Press the ‘START/Hold
To Reset’button to continue.A short time after the
programme has finished,the ‘Door Locked’indicator light
will go out and the door can be opened.If you turn the wash
programme selector dial during a programme,the ‘Wash’
light will flash to show that the programme running is not
that shown on the dial. Turn the dial to the original
programme to stop the flashing. The flashing will stop
automatically when the programme enters the rinse phase.
Progress indicators
These will light up when you choose a programme, to
indicate the progress of the selected programme.
When started, the first light in the cycle will stay lit and
as the machine progresses, successive lights will come
on until the programme finishes. The ‘End’light will
stay lit until you turn the programme selector dial to
the ‘OFF’ position or choose another programme or
option.
‘START/Hold To Reset’ button
Programme selector dial
*Vogue aquarius 1666200001-09 04/04/2002 8:58 am Page 15