Hotpoint WM53 Washer User Manual


 
IMPORTANT INFORMATION: Before selecting a programme, ensure the mains
button is in the ‘OFF’position.
Add detergent and or
conditioner to the
dispenser drawer,see
pages 14-15. Refer to
detergent manufacturer’s
dosage instructions.
Select required wash
programme by turning
the wash dial clockwise,
you will hear a click as
the pointer aligns at the
start position.
Switch on both the
water & electricity
supply at the mains.
Select optional wash
features by pressing
button, a colour band
indicates selection.
Sort laundry by label
into groups with the
same wash
requirements and
load appliance.
Switch ‘ON’, the door will
lock and after a few
seconds the indicator
light will illuminate
throughout the wash
programme.
1-2 minutes after
completion of the wash
programme the
indicator light will go
out and the door can
be opened.Switch ‘OFF’
after use.
Close door by applying
pressure at the
3 o’clock position.
4
5
6
1
2
3
78
Note: We recommend on
completion of your wash
programme that you switch
off both the electricity and
water supply to the
appliance.
WARNINGS
Do not allow children to
play with the appliance
or tamper with the
controls.
Do not overload
appliance! It may
damage laundry and
reduce the quality of
the wash.
Do not attempt to open
the door when the
indicator light is on.
A Typical Wash Programme
10