Hotpoint WF640 Washer User Manual


 
Options
STEP 6
Reduce Creases
Button Selection:
To select an option, press the button and you will see a light come on alongside the button.
Press again to cancel, and the light will go out.
NOTE: If the option selected is not available with the programme,the light will flash briefly.
Reduces wash action and spin speed,meaning less ironing for
delicate clothes.
This option is only available with programmes C, E, G,H and
Rinse & Spin.
Mini Load...
For washing a smaller load.
In addition to reducing actual washing time,this option will
reduce water and energy consumption by up to 50%.
Note:You can reduce the amount of detergent you use with this
wash.
This option is not available with programmes A, F,J, K,L, M
and Spin Only.
Time Saver
Saves up to a third on the programme time.
This option is only available with programmes B,D,G and H.
Rinse Hold
Clothes will be held in the final rinse water, keeping them fresh
until you are ready to complete the programme.
Complete the final spin by pressing the Rinse Hold button when
the light is flashing.
This is not available with programmes A, J,L M, Rinse & Spin
or Spin Only.
Time Delay...
(Models WF645,WF640 and WF630 only)
This option can delay the start of your wash programme by up
to 24 hours. The display will show the delay you have chosen.
Each press of the option button will add a delay of one hour. If
you press after 24 shows on the display the machine will reset
the time delay and show ‘OFF’ in the display, any press after this
will start counting again from one hour
Extra Rinse...
(Model WF620 only)
For large wash loads and items for young children or people
with sensitive skin.
This option adds a rinse.
This is not available with programmes A, J,K, L,M or Spin
Only.
Variable Spin Speed
This allows you to reduce the spin speed
below the maximum for the programme you
have chosen.
Each press of the button will reduce the spin
speed to the next lower band.The new spin
speed will be shown in the display.
If you press again after ‘OFF’has been
displayed, the machine will revert to the
original higher spin speed.
This allows you to reduce the wash
temperature below the maximum for the
programme you have chosen.
Each press of the button will reduce the
wash temperature by 5˚C.The new wash
temperature will be shown in the display.
If you press again after ‘OFF’has been
displayed, the machine will revert to the
original higher wash temperature.
Variable Temperature
WARNINGS:
DO NOT allow
children to play
with the appliance
or tamper with the
controls.
DO NOT overload
the appliance!
It may damage
the laundry and
reduce the
quality of the
wash.
DO NOT try to
open the door
when the ‘Door
Locked’ indicator
light is on.
During the wash
cycle,remember
that the door
glass may
become hot to
the touch.
DO NOT open the
dispenser drawer
during any
programme.
If you stop a programme
part way through a wash
or there is a power cut,
take care when opening
the door,the machine
may contain hot water.