Filter
Top Products
GB
9
Wash
cycles
Description of the wash cycle
Max.
temp.
(°C)
Max.
speed
(rpm)
Drying
Detergents
Max. load
(kg)
Cycle
duration
Wash
Fabric
softener
Normal
Mini
load
Everyday wash cycles (Daily)
The duration of the wash cycles can be checked on the display.
Cottons (1) (1st press of the button): extremely soiled whites. 90° 1600
7 3
Cottons (2) (2nd press of the button): heavily soiled whites and
resistant colours.
60° 1600
7 3
Cottons (3) (3rd press of the button): lightly soiled whites and
delicate colours.
40° 1600
7 3
Synthetics (1st press of the button): heavily soiled resistant colours. 50° 800
3 1,5
Synthetics (2st press of the button): lightly soiled resistant colours. 40° 800
3 1,5
Synthetics (3st press of the button): lightly soiled resistant colours. 30° 800
3 1,5
Ready to Wear (* *)
30° 1600
1 -
Wool: for wool, cashmere, etc. 40° 800
1,5 1
M
Memory: allows for any wash cycle to be stored.
Silk: for garments in silk and viscose, lingerie. 30° 0 -
1 1
Drying programmes
Cotton Dry
- -
- - 5 -
Synthetics Dry
- -
- - 3 -
Wool Dry
- -
- - 1,5 -
Partial wash cycles
Fast Spin cottons (1st press of the button) - 1600
- - 7 -
Slow spin delicates (2st press of the button) - 800
- - 3 -
Rinse cottons (1st press of the button) - 1600
-
7 3
Pump out (2st press of the button) - 0 - - 7 -
Wash cycles and functions
Table of wash cycles
Wash functions
Super Wash
Because a greater quantity of water is used in the initial
phase of the cycle, and because of the increased cycle
duration, this function offers a high-performance wash.
! It cannot be used with the , , , “Drying
programmes” and “Partial wash cycles”.
Reduced Creases
By selecting this function, the wash and spin cycles will
be modified in order to reduce the formation of creases.
At the end of the cycle the washing machine will perform
slow rotations of the drum; the “Reduced creases” and
START/PAUSE indicator lights will flash (orange) and the
text “END OF CYCLE” will appear on the display. To end the
cycle, press the START/PAUSE button or the “Reduced
creases” button.
For the Silk/Curtains cycle, the machine will end the cycle
while the laundry is soaking; the “Reduced creases” and
START/PAUSE indicator lights will flash (orange) and the
text “RINSE HOLD” will appear on the display. To drain
the water so that the laundry may be removed, press the
START/PAUSE button or the “Reduced creases” button.
! It may not be used with the , , “Drying
programmes”,
and “Pump out” programmes.
Mini Load
This function is recommended for when the load of
laundry is equal to half, or less than half, of the maximum
recommended load (see Table of wash cycles).
! It cannot be used in conjunction with the , “Drying
programmes”,
and “Pump out” programmes.
Timer Saver
Reduces the duration of the wash cycle.
! It cannot be used with the , , , “Drying program-
mes” and “Partial wash cycles”.
(* *) Ready to Wear
This cycle was designed to wash and dry lightly soiled small loads quickly. By selecting this cycle it is possible to wash and dry a maximum load of 1 kg
in just 60 minutes.
!
Please note, this is an automatically programmed wash and dry cycle, therefore it is not possible to manually set a drying time or
drying level in conjunction with this cycle.
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration
can vary according to factors such as water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing
and any wash options selected.
For all Test Institutes:
(1) Test wash cycle in compliance with regulation EN 50229: set wash cycle (1
st
press of the button) with a temperature of 60°C.
(2) Long wash cycle for cottons: set wash cycle (2
nd
press of the button) with a temperature of 40°C.
(3) Short wash cycle for cottons: set wash cycle (3
rd
press of the button) with a temperature of 40°C.